|
nerdboy19 (August 19, 2008 at 2:30 pm)
Ok :)Then... happy building xD
hiddenglass (August 19, 2008 at 8:46 am)
Yea! you can see it in the control and the button area!! and yea i have the equipment(piece of foam, and plastic-bag). just i don`t had it there xD-Hg
nerdboy19 (August 18, 2008 at 7:31 pm)
oh you already have uploaded the video :Di nearly bet, you have the things to make the body ;) a piece of foam, and a plasticbag... i didn't knew it was the "equipment" from a rc car, then it could ending up being too heavy, but i'll cross my fingers :)happy hovercrafting
nerdboy19 (August 18, 2008 at 7:17 pm)
Ok :)as long as you don't have eny problems, every thing's allright :)i think i misunderstood you a little? im sorry about that...ill see forward to whatch your video :D
hiddenglass (August 18, 2008 at 4:22 pm)
Im uploading a video and i dont have anny problems with my motor...-Hg
nerdboy19 (August 18, 2008 at 4:04 pm)
You need a Electronic Speed Controller (ESC/Speedctrl/speedcontroller...) between your receiver and your motor, the ESC takes the commands from the receiver and converts them to signals to you motor, your ESC should be conected to your batteri.....you need a ESC to use a motor on what ever you are building which is controlled by RC, to say it the easy way :)-Nerdboy19
hiddenglass (August 18, 2008 at 2:59 pm)
No! do i need to have one on my hovercraft??-Hg
nerdboy19 (August 18, 2008 at 2:17 pm)
What? you mean buy one from me? ohhh im using them right now in an other project... you can buy one for just about 30-40$ (200 danish kroners. nearly the same in norway i think)depending on how much current it will take before it says PUFF ;)I'd like to see some photos and maybe a video :D
hiddenglass (August 18, 2008 at 10:41 am)
Ok! must i have one?
nerdboy19 (August 17, 2008 at 6:18 pm)
Hi, sorry... a "ESC" is an "Electronic Speed Controller"-Nerdboy19 :) |
